- Fast and Affordable Air Compressors
AL Series
Product Characteristics
Standard Specification
Product Characteristics
Characteristics of AL Series Products
Highest performance
- Energy conservation and maximized discharge volume through optimization of scroll airend discharge port
- Standard application of stainless tank, corrugated type high performance after cooler, and cooling fan to generate clean compress air
Energy saving
- Energy saving by sequential control :
Multiple compressors are sequentially started at constant intervals to minimize power variation during start-up, reducing starting current - Energy saving through pyramid control : flexible operation of multiple compressors according to air consumption
– Multiple compressors are flexibly operated according to air consumption to maximally
suppress power use and promote energy reduction
High reliability
- Airend with high durability based on simple mechanism and minimal parts
- Airend specially coated after precise processing for sufficient durability under severe environment
- Suction filter with decontamination efficiency of 99.9%, high efficiency Sirocco Fan and low-noise cooling fan
User-friendly design
- Different controllers are applied to different capacities, supporting Korea, English and Chinese languages
- Reliable components and intelligent Micom controller
- Diverse models and options to expand the scope of choice for customers
Minimal noise of 49dB among equivalents
- Continuation of suction, compression and discharge cycles results in scroll mechanism with extremely small torque variation and ultra low noise (49dB) of sound absorption material attached on the front side of external cover
- Balancing design for crank shaft and turning scroll, and special Vibration-proof rubber at the bottom of airend and motor base
Convenience improvement
- Condensate drain is installed to remove the condensate in the system. This improve the reliability
- Ball valve is installed to operate during the partial inspection. (applied to AL30~AL50)
Standard Specification
Standard specification of AL Series
| Srl No. | Model | Max Working Pressure | Capacity | Motor Power | Noise | Tank Volume | Dimention (LxWxH) | Air Outlet | Weight | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Kgf/Cm²G | PsiG | LPM | CFM | kW | HP | dB(A) | Lit | mm | A (B) | Kgs | |||
| 1 | AL3 | 8.0 9.9 |
115 140 |
271 219 |
9.6 7.7 |
2.2 | 3 | 49 | 38 | 650 x 735 x 1140 | 15 (1/2″) | 195 | |
| 2 | AL5 | 8.0 9.9 |
115 140 |
420 352 |
14.8 12.4 |
3.7 | 5 | 50 | 38 | 650 x 735 x 1140 | 15 (1/2″) | 210 | |
| 3 | AL7 | 8.0 9.9 |
115 140 |
691 571 |
24.4 20.2 |
2.2 x 1 3.7 x 1 |
3 x 1 5 x 1 |
52 | N/A | 640 x1180 x 1050 | 25 (1″) | 335 | |
| 4 | AL10 | 8.0 9.9 |
115 140 |
840 704 |
29.6 24.9 |
3.7 x 2 | 5 x 2 | 53 | N/A | 640 x1180 x 1050 | 25 (1″) | 340 | |
| 5 | AL15 | 8.0 9.9 |
115 140 |
1,260 1,056 |
44.4 37.3 |
3.7 x 3 | 5 x 3 | 56 | N/A | 710 x 1215 x 1245 | 25 (1″) | 485 | |
| 6 | AL20 | 8.0 9.9 |
115 140 |
1,680 1,408 |
59.2 49.7 |
3.7 x 4 | 5 x 4 | 58 | N/A | 710 x 1215 x 1610 | 25 (1″) | 620 | |
| 7 | AL25 | 8.0 9.9 |
115 140 |
2,100 1,760 |
74.0 62.1 |
3.7 x 5 | 5 x 5 | 59 | N/A | 710 x 1215 x 1975 | 25 (1″) | 750 | |
| 8 | AL30 | 8.0 9.9 |
115 140 |
2,520 2,112 |
88.8 74.6 |
3.7 x 6 | 5 x 6 | 62 | N/A | 1600 x 1215 x 1245 | 40 (1½”) | 1080 | |
| 9 | AL40 | 8.0 9.9 |
115 140 |
3,360 2,816 |
118.4 99.4 |
3.7 x 8 | 5 x 8 | 63 | N/A | 1600 x 1215 x 1610 | 40 (1½”) | 1250 | |
| 10 | AL50 | 8.0 9.9 |
115 140 |
4,200 3,520 |
148.0 124.3 |
3.7 x 10 | 5 x 10 | 65 | N/A | 1600 x 1215 x 1975 | 40 (1½”) | 1480 | |